Easy click flooring installation

The tongue-and-groove design allows boards simply to click together and float, so to speak, over the subfloor. Even a relatively experienced DIYer can install click flooring using basic tools and a handful of inexpensive, readily available supplies. Like solid wood flooring, engineered wood products are sensitive to moisture, alternately shrinking and expanding as temperatures and humidity levels fluctuate.

Therefore, the first step in installing click flooring is to bring in the boards, remove any packaging, and give your purchased flooring time to acclimate to the conditions of your space. A period between one and five days normally suffices. It may be somewhat of a drag, but exercising patience here is the best thing you can do to ensure that the floorboards do not separate or cup over time.

Now is the time to plan your installation strategy. Best practice is to install floorboards so that they run parallel to the longest dimension in the room. You may wish to dry-fit at least some of the material as a way of proving not only that your strategy is going to work, but also that you have enough flooring to get the job done.

Before you proceed any further, inspect all planks for damage and defects. As you prepare to install the first course of floorboards, remove some planks from at least three different boxes typically, engineered products are boxed by length. Lay out a line of boards in random sequence, then grab the first board and place it in the corner, with the grooved side facing away from the wall. Place expansion spacers between the wall and the board edges that meet the wall.

Install remaining full planks in the first row. The last plank in the first row may need to be cut. Measure the distance between the wall and the surface of the last full plank. Score the surface of the plank with a utility knife, and then snap the plank at the score line. Install the long side of the first plank of the second row. Insert the tongue side into the groove side of the previous row at a low angle and lower flat to the substrate. Install the second plank of the second row.

Then, angle the end joint into the previous plank. Angle the plank down and gently push in until the plank locks into the previous row. Continue installing remaining planks in second row. It is important to make sure that the first two rows are straight and square or this will adversely affect the entire installation.

Continue working from left to right, row by row. When fitting around door trim it will be necessary to slide the plank under the trim. This can be accomplished easily by starting the row on the side of the room with the door trim and then sliding the plank into place once it is attached.

The row can be completed by inserting the tongue in to the groove or the groove into the tongue depending on the direction. When the LVT planks are installed in a bathroom, the flooring can be laid under the toilet only if the floor is separated from adjacent rooms with a doorway threshold.

Use a high quality silicone caulking to fill the expansion space at the tub, shower and all wet areas to prevent surface water seepage under the floor. Follow the instructions on the adhesive for trowel size and drying time. Always use a flush stair nose molding to finish each step at the nose. Manufacturer Specific Guides. Care and Maintenance. Getting Started. A total win-win-WIN! Some of the best cork flooring can be installed just like a floating laminate or LVT floor.

This waiting can sometimes be the worst part of the job! There are a few pros and cons of cork flooring. One pro: cork can be some of the easiest flooring to install with snap-together planks. Cork might be self-repairing, but it can also be gouged relatively easily.

Wondering how to replace flooring without getting massively overwhelmed? Spread it out! Replacing your flooring is a massive undertaking and will take a lot of time.

Plan to spread your project out over a few weekends to keep the whole DIY as stress-free as possible. Lastly, no matter the flooring, always measure twice and cut once! Seriously, nothing sucks more than wasting your material.

And right now, that means helping you find the easiest flooring to install! And for more information on flooring, check out:. Elizabeth is a public relations expert and freelance writer. That would transform my whole kitchen. It would also keep it safe from my kids and their ability to spill every cup they have.

Absolutely beautiful! Your email address will not be published. We get it! Everyone loves the cozy, comfortable softness of plush fabric under their bare feet.

Like a deer frozen in headlights, you may be tempted to just point to the first color you like and then run out of the store. AquaSeal flooring may not be the first product that comes to mind when you think of the best laminate flooring. So, is it any good? About The Author. Impressive tips about Flooring installation! Thanks for sharing!